What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
09.06.2025 02:30

There are three different concepts here that are getting confused.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
But it can get overloaded, and no longer works.
2024–10–14 [Omar Gharbi Omar Gharbi ]
It seems Mohan does not understand the difference between a comment and an Answer.
What is the naughtiest fantasy that you've lived out?
Edit 2024–10.
The bolt then partially travels down the line to your home.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Roster rankings: PFF gives an ugly grade to the Browns roster - Dawgs By Nature
An AC voltage/ current source, and an ac inductive load.
He then describes Rainy Season and Lightning.
(Dc diagram shown, AC is similar).
Can a mother forget her child after she puts him or her up for adoption?
but I think this circuit , shows a few more pieces.
These devices are installed between the “hot” and “neutral” and protective ground.
There are two important concepts here.
macOS Tahoe Name Leaked Ahead of Apple's WWDC Event Next Week - MacRumors
This is 'the assistant's answer'
One
so, what happens?
How often do you watch the news on TV?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
nine
What is lightning?
What does a fuse do?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
One is “what exactly is in a ‘surge protector’ ? ”
Why didn't people like the Game of Thrones ending?
It also is a device that limits the change in current flow.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
A fuse is a non-resetable over current circuit protector.
Do you believe that Jesus was God on Earth?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Here is a simplified AC power diagram.
Now when you have a certain ac resistance, then a current flows in a loop.
401(k) Stats Suggest Americans Still Confident - Newser
At one ohm, the resistor has a maximum of 1 watt power.
He then asserts :
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Why do I sweat so much after shower?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At least they know the answer if they wanted it.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The third is lightning and “how it gets conducted into a home.”
Because the load is inductive, the current lags the voltage.(by a bit).
This is where the MOV conducts again, and dissipated the energy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
A circuit breaker is similar, but is resettable.
[image of Common-mode choke]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
In schematic diagrams this is the symbol for a fuse:
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but this device (an Inductor) … impedes the rapid changes in the current.
what exactly is a ‘surge’ protector?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–16 [ OO OLAOYE OYEBODE ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
I post the exact comment here.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Barnstars:
a photo is worth a thousand words.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This one hit behind the barn.
Upvotes:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
First Sentence:
the problem then depends on "how fast does the fuse operate?".
The other is “what does a “fuse” do?”
So, the voltage could go up to 500 volts, and the fuse will not open up.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
For this case there are devices called Metal oxide varistors (MOV).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
But… the neutral is now “floating” because of the 1 ohm resistance.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This device then solves the entire problem.
2024–10–10[John johnson John Johnson ]
These are simplified answers to the original question, and does not change anything I wrote above.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
eight
He then describes the function of a fuse.
This is where this question deviates from being a 'generic' question, and becomes more specific.